VENDO amplificador a válvulas Cayin A88T
Pues eso. Que por no usar, vendo este magnífico aparato, con su embalaje e instrucciones originales, traído directamente de China (una de las últimas unidades que sacó Cayin a Europa, como favor personal hacia mi como organizador de la famosa compra chinorris).
Un trasto que no necesita presentación, si bien podéis ver una review aquí por si no lo conocéis. Solo decir que, para muchos, es uno de los mejores amplificadores del mundo.
Por cierto, entrega una chicha descomunal para ser un valvular. Para que os hagáis una idea, está atacando unas Compact XZ-8 sin despeinarse lo más mínimo. :blink De las Polk Lsi9, directamente se cachondea. :sudor
¡Ah! Y un detalle no habitual en un ampli de válvulas: lleva mando a distancia. Y que mando... :rev Un bodoque macizo de metal.
En suma, el amplificador definitivo para los amantes del estéreo. Por cierto, ha sido nombrado 'Editor's Choice' Product of the Year en AVL magazine.
Su precio, aún no está decidido. Para que os hagáis una idea, si lo encontráis nuevo (algo complicado), ronda los tres mil euros (por ejemplo). Obviamente, mi precio no es ese. Mil cuatrocientos, negociables.
http://www.6moons.com/audioreviews/cayin/hero2.jpg
http://www.6moons.com/audioreviews/cayin/hero3.jpg
http://www.6moons.com/audioreviews/cayin/hero4.jpg
http://www.6moons.com/audioreviews/cayin/remote.jpg
Ni lo dudéis. Es una oportunidad. Aprovechad antes de que me arrepienta. :sudor
Manu1oo1
PD) AÑADO comentario de Stereophile y análisis técnico del aparato. Acojonante.
Cita:
What struck me right away was the Cayin's immediacy - a lifelike quality that was nearly like the sound of a single-ended-triode (SET) amp. (The Mac MC-275 is like that, too)...There was another similarity between the A-88T and the MC-275: ballsy bass. The Cayin's bass was exceptionally well controlled and extended for a tube amp. When a tube amp gets bass right, it gets it very right - ripe, rich, full-bodied. The Cayin did. I do like tight bottom ends...This amp was silent. There was very little background noise, either - a bugaboo with some tube amps (and solid-state models, too). The Cayin A-88T's price, design, build quality, and sound are exemplary...it looks beautiful, and it looks beautifully built."
- Sam Tellig, Stereophile
This piece was hand-built with extreme attention to detail, including point-to-point wiring. Point-to-point was the way that amps used to be wired back in the 1950s and '60s when cost was not the primary objective. Nowadays, most everything contains circuit boards instead of this point-to-point wiring, which is much more dependable and better performing. The bottom line is that point-to-point wiring sounds better. It's one of the main reasons why these Cayin pieces sound like the classic tube gear from Marantz and McIntosh. Anymore, products that feature point-to-point wiring cost a fortune, or they feature sub-par workmanship. You simply are not going to find craftsmanship likewith this Cayin gearfor anywhere close to this price.
There are output taps for 4, 8 or 16 ohms. This allows you to fine-tune the sound that you desire. Switching is simple, and listening to the differences is a lot of fun.
There is a removable cage, included at no extra charge. The cage snaps into place simply, so that you can take it on and off with no problem. Keep it on if you're worried about protecting your tubes, or take it off to show what real, heavy-duty, classic tube gear looks like.
Features:
Includes remote-control selection of preamp (bypass) input, allowing for power amp configuration Includes Protective Cage Tubes: 6550/KT88x4, 6SL7x2, 6SN7x2 Power output: 22W triode; 45W ultralinear Frequency response: 18Hz-35kHz THD: 1% (1kHz) S/N Ratio: 90db Input impedance: 100K ohms Input sensitivity: 260mV (integrated); 600mV (pre-in) Output impedance: 4 ohm, 8 ohm, 16 ohm Weight: 55 pounds (25 kg) Power consumption: 280W Hand made with point-point wiring Soft-start circuit (30 seconds) - ideal for extended tube life Tube plate fuse protects the amp output stage Custom designed output transformers for low impedance/wide bandwidth with multiple-tap outputs Toridal power transformer Heavy-gauge, ventilated steel chassis - hand rubbed and polished Premium parts, including chassis-mounted ceramic tube sockets, ALPS volume control, Nichicon and Realcap capacitors, WBT style speaker terminals and Gold-plated input jacks
:sudor :sudor :sudor :sudor :sudor
Re: VENDO amplificador a válvulas Cayin A88T
Cita:
Su precio, aún no está decidido. Para que os hagáis una idea, si lo encontráis nuevo (algo complicado), ronda los tres mil euros (
por ejemplo). Obviamente, mi precio no será ese, ni mucho menos. De momento, escucho ofertas.
Es obligatorio poner precio en cada uno de los anuncios de este subforo, como se indica en las normas.
Por favor, edita el post y pon precio.
Re: VENDO amplificador a válvulas Cayin A88T
Editado. Mis disculpas. :rev
Manu1oo1
Re: VENDO amplificador a válvulas Cayin A88T
Re: VENDO amplificador a válvulas Cayin A88T
Contestado. :hola
Manu1oo1
Re: VENDO amplificador a válvulas Cayin A88T
...Cosa mas bonita coño....si no fuese por mi primaluna prologue 2..a lo mejor me hipotecaba por el..........¡¡suerte con la venta campeon¡¡¡
Re: VENDO amplificador a válvulas Cayin A88T
Con posibilidad de usarse como etapa para unos frontales dentro de un sistema de a/v porque tiene un HT Loop.
Me está tentando incluso a mi mismo y eso que tengo el A70T de Cayin.
Un saludo, Javier G.
Re: VENDO amplificador a válvulas Cayin A88T
tienes un m,p.
pero no me deja lo tienes lleno
Re: VENDO amplificador a válvulas Cayin A88T
Ya he borrado algunos. Disculpa. :)
Manu1oo1