Buenas, dejo por aquí el enlace del unboxing que le hice a al Steelbook del 40th. Que por cierto me llegó tocado, alguien más opina que el acabado parece que tiende a tener problemas con la pintura? No se si por el material utilizado o por que.
Aunque me parece muy bonito, con el poster original.

https://youtu.be/30QctLu-pZE

Dentro de los steelbooks, independientemente de que sean mate o brillo, hay diferentes calidades de acabados. Se ve enseguida, ya que, sobre todo las esquinas, se levanta la pintura enseguida. Ese defecto que muestras, le pasas un rotulador negro indeleble y acto seguido lo difuminas con el dedo antes de que seque completamente, y puede quedar muy disimulado. Mas preocupante es el pequeño bollo de la parte trasera, aunque son dobleces que con maña, quitas la tapa trasera, la colocas sobre una mesa limpia y totalmente plana, y con un útil redondeado (puede ser desde un cubierto hasta un boli, ect...) envuelto en un paño de microfibras le pasas suavemente las veces que haga falta hasta sacar el boyo. Ojo con todo esto, que si requiere cierta práctica, así que si lo vas hacer, empieza haciéndolo muy suavemente y vas viendo el resultado.

Deberías plantearte hacer un canal de youtube o, aquí mismo un post específico, sobre este tipo de "manualidades" y arreglos caseros. Ya... ya sé lo del "Trekonsejo" Retómalo, hombre.

Vamos, es que tengo por ahí algunas latas con pequeños bollos que me gustaría trastear, pero sin ir más lejos de la realidad, ni lo he intentado por pavor. Ni siquiera sabía que se podía desmontar a mano la lata en sí de la estructura interior...

PD. La caja metálica descatalogada sigue siendo y será una maravilla, independientemente de la edición de Shout!

Muchas veces me han propuesto tanto acudir a canales como crear uno. Pero, hoy por hoy, me interesa mantener mínimamente mi privacidad, aunque la mayoría sepa quien soy.

Eso si, no me importa que se borren fotos, pero las de los trekonsejos si me fastidió que se perdieran

Es increible que amazón usa y Ca sigan enviando los steelbooks en esas bolsitas amarillas. Es casi imposible que no llegue tocado por algún lado.

Aparte que los manipula gente con garras en vez de manos. En muchos boyos se aprecia hasta la huella del ser humano manipulador, y por no hablar de las hendiduras con forma de uña...

Los paquetes de Amazon muchas veces se caen al suelo...en la misma furgoneta de reparto sin contar las ciento de veces que se caen en el recorrido total, ya he reclamado hasta la saciedad a los yanquis.... Burbuja y un sobre amarillo sin más....

Iniciado por PadreKarras

Es increible que amazón usa y Ca sigan enviando los steelbooks en esas bolsitas amarillas. Es casi imposible que no llegue tocado por algún lado.

Aparte que los manipula gente con garras en vez de manos. En muchos boyos se aprecia hasta la huella del ser humano manipulador, y por no hablar de las hendiduras con forma de uña...

Totalmente, los steelbook's por lo menos en caja de cartón, los amarais normales vale que envíen en bolsita de burbujas pero los steels? Bueno, dentro de lo malo todavía he tenido suerte, y el Steelbook es precioso eso si.

Una noticia sobre el nuevo pack USA de Scream Factory: se incluirá el "metraje perdido" de la segunda parte.

Leído en el FB de Bill Hunt:

The upcoming FRIDAY THE 13 boxed set from Scream Factory will include the uncut footage from Part 2. How it was found after being lost for almost 40 years is a great story! As many fans of the series know, several minutes were trimmed because of a crackdown by the MPAA on slasher movies. A few stills have surfaced over the years that gave a hint to what was missing, but despite many efforts over the years to find the footage, it was believed to have been lost or destroyed.


While prepping to shoot an interview with Bill Randolph for Part 2, I decided to re-watch the CRYSTAL LAKE MEMORIES documentary in order to avoid repeating stories that have already been discussed in depth for years. As expected, there was talk about the footage that was shot, but not included in the final cut due to ratings board. Greg Nicotero mentions that FX artist Carl Fullerton showed him the footage in question. I wondered if anyone had reached out to Fullerton to see if he may still have the scenes that the fans have been dying to see for years. Bill Randolph (who wanted to see his scene as much as anyone else did) and I reached out to Fullerton to see if he still had it. We left a few voicemails and hoped for the best. With less than two weeks before our deadline, I received a call from Carl saying he had a VHS tape with all the material that was trimmed. However, he couldn’t remember exactly what was on it, but was kind enough to loan it to us for inclusion on the set.

Because I was terrified that if it was shipped via postal mail, it might get lost in transit, so I made arrangements to get the tape in person through my co-producer and pal, Peter Bracke. I joked with Peter that I should have gotten him a suitcase with handcuffs and a bodyguard as this most likely was the only copy in existence. Peter met up with Carl, who handed him the old cassette with a typewritten date of April 24, 1981 -- about a month before the film opened in theaters! What could be on the tape?

Now came the fun part, seeing if the tape was still viewable after all of these years. It's possible because of its age, it could have been blank or no longer viewable. We wouldn’t ’t know until we got it transferred. Shout Factory's Cliff MacMillan made arrangements to get it transferred at a top-notch facility. However, there was an issue: the lab indicated that the tape was stuck together. If pulled apart, the magnetic information could be stripped, which would mean that we would lose everything. The only solution: baking the tape in an oven overnight to separate the reels. The VHS would have to be taken apart, the reels would have placed into an oven and baked overnight to in order to make it playable. After waiting almost 40 years for this footage, we would have to wait another couple of days to see if “Operation: Baking With Jason “ was successful. So after the careful dismantling and baking operation, the tape was then put back into the cartridge so it could be transferred to a digital format.

Now for the moment of truth -- what’s on the tape and is it watchable? Eureka! “It’s alive!” After hearing so much about this footage over the years, I was astonished when viewing the contents for the first time. It appears that Fullerton knew the film was going to be trimmed, so he asked the editor to assemble the trims, and make a copy so he would have a them for his portfolio. The first thing you notice is that nearly every death is considerably longer! There are also few scenes that I didn’t even realize that were that trimmed, ie, Adrienne King’s death.

Even more surprising was the quality. At nearly four decades old, the tape gave me cause to worry, but what I discovered was that the older vintage of the tape actually worked in everyone’s favor. The VHS cassettes used back in the day were of a much higher quality than the ones used a few years later. In fact, I was surprised at how good the image quality was, especially considering the source.


I must have watched the footage found ten times, as I was in utter disbelief that I was finally seeing this material that was considered forever lost. Viewing it confirmed that it was no longer lost, but found. I want to thank Carl Fullerton for going the extra mile to get us the tape; Bill Randolph for reaching out to Carl; my co-producer, Peter Bracke for transporting the holy grail; and to Shout Factory's Cliff MacMillan and Jeff Nelson for keeping the faith. Every Friday the 13th fan owes them a big round of applause and their eternal gratitude.

Iniciado por Trek

Dentro de los steelbooks, independientemente de que sean mate o brillo, hay diferentes calidades de acabados. Se ve enseguida, ya que, sobre todo las esquinas, se levanta la pintura enseguida. Ese defecto que muestras, le pasas un rotulador negro indeleble y acto seguido lo difuminas con el dedo antes de que seque completamente, y puede quedar muy disimulado. Mas preocupante es el pequeño bollo de la parte trasera, aunque son dobleces que con maña, quitas la tapa trasera, la colocas sobre una mesa limpia y totalmente plana, y con un útil redondeado (puede ser desde un cubierto hasta un boli, ect...) envuelto en un paño de microfibras le pasas suavemente las veces que haga falta hasta sacar el boyo. Ojo con todo esto, que si requiere cierta práctica, así que si lo vas hacer, empieza haciéndolo muy suavemente y vas viendo el resultado.

Gracias por los consejos 👍🏻 lo de la pintura lo arreglé con un grafo permanente y a quedado bastante bien, por suerte no estaba en una zona muy visible, lo de la abolladura ya no me atrevo a tocarlo 😅