Skyview 1.5105.0.3406 & SkyAVC.ax (NET) 2.0.0.3221
Versión para imprimir
Haali Media Splitter
Changes
* 18/01/2006 [General] Don't discard frames when pausing.
* 17/01/2006 [General] Minor fixes/improvements. [MP4] One more seeking fix.
* 15/01/2006 [General] Better thumbnail extraction. [Matroska] Muxer improvements. [MP4] Better seeking.
catalyst 6.1
Issues Resolved in Catalyst® Software Suite 6.1
The following section provides a summary of the issues that have been resolved in the latest version of Catalyst®. These include:
* BattleField 2 Special Forces: A blooming or ghosting effect is no longer noticed when playing the game in night vision mode. Further details on this resolved issue can be found in topic number 737-21263
* Beyond Good and Evil: Flickering artifacts are no longer noticed on the game characters after approximately 15 minutes of game play. Further details on this resolved issue can be found in topic number 737-20795
* Dark Age of Camelot: The game no longer exits to the desktop immediately after launching, or after playing for up to 15 minutes. Further details on this resolved issue can be found in topic number 737-20794
* Everquest II, The Fall, and World of Warcraft: A VPU Recover event or the operating system failing to respond no longer occur when playing the game. Further details on these resolved issues can be found in topic number 737-21437
* Half-Life2: Enabling Catalyst AI no longer results in the outer edges of the water appear dark or black in color. Further details on this resolved issue can be found in topic number 737-21448
* World of Warcraft: Rotating or zooming within the Blackwing Lair or Seering George level of the game no longer results in a VPR Recover occurring after approximately a few minutes of game play. Further details on this resolved issue can be found in topic number 737-21265
* Catalyst Control Center: The Display Properties aspect is now translated correctly for Traditional Chinese. Further details on this resolved issue can be found in topic number 737-21440
* Attempting to hot-plug a DFP display device using the HDMI-DVI connector no longer results in the DFP display device failing to display an image. Further details on this resolved issue can be found in topic number 737-21442
* Viewing TV for several hours under Windows XP Media Center Edition on a system containing either an ATI Radeon® X1300 or an ATI Radeon® X1800 no longer results in an extraordinary long delay in the shut down and no longer results in Windows XP MCE TV failing to restart. Further details on this resolved issue can be found in topic number
* The radio seek function found in the Windows XP Media Center Edition operating system is now functioning properly when using an ATI Radeon® X800. Further details on this resolved issue can be found in topic number 737-21449
Divx 6.1.1
anges in DivX 6.1.1 Update :
- Fixed a problem where some systems would crash as the Psychovisual Enhancement method was modified in the encoder configuration window.
- Improved B-frame decision.
- Improved rate control for very high bitrates.
- Fixed a problem that caused cropping to reduce performance.
- Fixed an issue where adjusting the VBV_bitrate slider in the Feedback Window would reset the VBV buffer occupancy.
- Improved Japanese encoder translations.
- Fixed a problem where the decoder may fail if both smooth playback and YUV output are enabled in the Decoder Configuration Utility.
- Fixed a post-processing issue in the decoder for multi-threading systems.
- Fixed a handle leak in the decoder.
AltDvb_Base_Ver20_B1706.zip
ew hardware interfaces:
* Pinnacle PCTV Sat (no CI version)
Thanks to: MPatrascanu
* NovaPCI
Thanks to: Stailus
* Twinhan VisionPlus (tested only with VP1020a)
Thanks to: Rahaal & Neztiti
* Network Client
Full control of DVB card + TS streaming over TCP/IP
Server (AltSRV.exe) must be running on remote PC !
Application changes:
* Minimize to tray
* Mouse gestures (on video & teletext window)
* Video: Stay-On-Top Floating Windows (magnetic to screen borders)
* Scheduler, with "Wakeup-from-Standby" option (hardware dependent)
* Software decoding using FFDeCSA (ported from linux)
* Direct shortcuts for scanning current transponder/current satellite
* Sleeptimer, with exit/suspend/hibernate/shutdown option when time elapsed
* Command line parameters (see CmdLine.txt for details)
* History graphs for signal,CPU & Memory
* Extended keyboard shortcuts & RemoteControl
* Multiple favorites per channel (max 4)
* Improved channels group/filter
* Operations on selected channels: Delete All,Set Favorites,Set PluginProfile
* USALS GotoX angle adjusted with your location (thanks to Ulrich B. [DF6JB] )
* Transport Stream information (PID DataRate & DataType)
DirectShow:
* New source filter with internal A/V demuxer
* Automatic graph builder (by selecting filters)
* Configuration form .GRF/.XGR or .GRS (Graph Script)
* Manual aspect ratio settings (Letterbox,4/3,16/9)
* Overscan border in full-screen (optional)
* Color setting in VMR9 Mode (hardware dependent)
* Audio channel A/B selector (MonoSwitch.ax)
* Audio/Video MediaType detection
* Can play AC3 stream
Interfaces:
* Dynamic HW/SW PID filters for SkyStar2
* Software mode for SkyStar1
* Record for SkyStar1 (PVA format only)
Plugins:
* Enhanced management
* User profiles (enable/disable group of plugins)
* Profile can be automatically changed on new channel
* Can deliver TS packets (188bytes) if PID |= 0x8000
Scanner:
* Transponders: List editor
* Transponders: Synchronize & Update (from WWW or SDX or NIT or other INI file)
* Transponders: Selections using multiple condition (Freq Range,SR Range,Polarity)
* Channels with no service description (SDT) can be auto-updated from SDX file
Record:
* Stop conditions (Size/Time) & configurable split size
* Custom filename format
* Full Transport Stream Recorder (DVB Card dependent)
* Single PID recorder
Services:
* EPG Viewer with content and text filter/search
* Teletext subtitles (software mode)
* Native teletext (unicode) with hotlink navigation
(page numbers & web addresses)
Fixed:
* Recording OK when using FFDecsa
* Channel/Group sorting bug
* DiseqC commands for simple switches (Toneburst A/B)
MyTheatre.v3.33.7.exe
supports 16:10 and 5:4 aspect ratios, automatically switches to DVD mode when opening a file that is in a folder called VIDEO_TS and the CPU hogging has been fixed.
ProjectX_0.90.3.01.zip
contains some improvements in teletext handling and subtitle demuxing, has a slightly adapted GUI and fixes some bugs.
AltDvb_Base_Ver21_B1881.zip
Application:
* Custom aspect for floating window (Free/4:3/16:9)
* "Minimize to tray" as option (default=true)
* Channel bitrate viewer (Tools , only for budget cards)
* Last channel history (see "Previous" button)
* Quick favorites [F3] functional as in previous version
(Warning: It override first fav. item with "General")
* Preferred audio language (used on scan/update channel)
* New timer action: "Record"
* REC Stop time can be changed (select record then right-click)
* Channels floating window (see popup-menu from floating video)
Interfaces:
* SkyStar1: Render/DirectDraw mode can be changed
* Pinnacle: No more app freeze on exit
* Twinhan : Support VP1030 and old/blue VP1020
* SkyStar2: Working in user (non-admin) account
Fixed:
* Win98 compatibility (tested only in VmWare)
* Device interface selector list empty
* Teletext button sometimes not enabled
* Teletext/Subtitles parser bug
* Record hotkey is working
* FullX problem (adding filter from callback)
* Option saved: "Video DblClick zones"
* Scrolling in EPG window
* Screensaver corectly disabled
* "Cannot focus..." error
* Bug in grouping by "CAID & PROV" or "Encryption Type"
* Goto previous channel works ok
* Category filter is now functional
2005-01-25 Alt-DVB Ver 2.0 (download)
New hardware interfaces:
* Pinnacle PCTV Sat (no CI version)
Thanks to: MPatrascanu
* NovaPCI
Thanks to: Stailus
* Twinhan VisionPlus (tested only with VP1020a)
Thanks to: Rahaal & Neztiti
* Network Client
Full control of DVB card + TS streaming over TCP/IP
Server (AltSRV.exe) must be running on remote PC !
Application changes:
* Minimize to tray
* Mouse gestures (on video & teletext window)
* Video: Stay-On-Top Floating Windows (magnetic to screen borders)
* Scheduler, with "Wakeup-from-Standby" option (hardware dependent)
* Software decoding using FFDeCSA (ported from linux)
* Direct shortcuts for scanning current transponder/current satellite
* Sleeptimer, with exit/suspend/hibernate/shutdown option when time elapsed
* Command line parameters (see CmdLine.txt for details)
* History graphs for signal,CPU & Memory
* Extended keyboard shortcuts & RemoteControl
* Multiple favorites per channel (max 4)
* Improved channels group/filter
* Operations on selected channels: Delete All,Set Favorites,Set PluginProfile
* USALS GotoX angle adjusted with your location (thanks to Ulrich B. [DF6JB] )
* Transport Stream information (PID DataRate & DataType)
DirectShow:
* New source filter with internal A/V demuxer
* Automatic graph builder (by selecting filters)
* Configuration form .GRF/.XGR or .GRS (Graph Script)
* Manual aspect ratio settings (Letterbox,4/3,16/9)
* Overscan border in full-screen (optional)
* Color setting in VMR9 Mode (hardware dependent)
* Audio channel A/B selector (MonoSwitch.ax)
* Audio/Video MediaType detection
* Can play AC3 stream
Interfaces:
* Dynamic HW/SW PID filters for SkyStar2
* Software mode for SkyStar1
* Record for SkyStar1 (PVA format only)
Plugins:
* Enhanced management
* User profiles (enable/disable group of plugins)
* Profile can be automatically changed on new channel
* Can deliver TS packets (188bytes) if PID |= 0x8000
Scanner:
* Transponders: List editor
* Transponders: Synchronize & Update (from WWW or SDX or NIT or other INI file)
* Transponders: Selections using multiple condition (Freq Range,SR Range,Polarity)
* Channels with no service description (SDT) can be auto-updated from SDX file
Record:
* Stop conditions (Size/Time) & configurable split size
* Custom filename format
* Full Transport Stream Recorder (DVB Card dependent)
* Single PID recorder
Services:
* EPG Viewer with content and text filter/search
* Teletext subtitles (software mode)
* Native teletext (unicode) with hotlink navigation
(page numbers & web addresses)
Fixed:
* Recording OK when using FFDecsa
* Channel/Group sorting bug
* DiseqC commands for simple switches (Toneburst A/B)
speedfan428.exe
4.28 - added IN-DEPTH HARD DISK ONLINE ANALYSIS tool
- added centralized INTERNET configuration tab in CONFIG dialog
- added support for NForce410
- added support for new video cards
- added Temperature Sensor Type, BJT Offset and Gain support for Fintek F75375S in CONFIGURE / ADVANCED (on Asus V9999 you might need to set BJT OFFSET from 174 to 202)
- SMART overall indicators are computed using a more advanced strategy
- updated the help file
- properly fixed byte swapped HDD model names
Catalyst 6.2
https://support.ati.com/ics/support/...ge&folderID=27
Issues Resolved in Catalyst® Software Suite 6.2
The following section provides a summary of the issues that have been resolved in the latest version of Catalyst®. These include:
* BattleField 2 Special Forces: A blooming or ghosting effect is no longer noticed when playing the game in night vision mode. Further details on this resolved issue can be found in topic number 737-21648
* City of Heroes: Running Shadertest 7 no longer results in slow performance being noticed. Further details can be found in topic number 737-21463
* Dragonshard: Playing the game under Windows XP Media Center Edition with CrossFire™ enabled, no longer results in the screen becoming out of sync, and a scrolling display image occurring shortly there after. Further details on this resolved issue can be found in topic number 737-20975
* Fable: The Lost Chapters: Playing the game under Windows XP MCE may result in the shadows found within the game appearing jittery, when the desktop resolution is set to 1024x768 32bpp, and all the game options are set to default. Further details on this resolved issue can be found in topic number 737-21184
* Half-Life2: Enabling Catalyst AI no longer results in the outer edges of the water appear dark or black in color. Further details on this resolved issue can be found in topic number. 737-21649
* Pacific Fighters: A stuttering effect at certain levels of the game is no longer noticed when playing the game with CrossFire enabled. Further details on this resolved issue can be found in topic number 737-21650
* The Fall: A VPU Recover event or the operating system failing to respond no longer occur when playing the game. Further details on this resolved issue can be found in topic number 737-21651
* World of Warcraft: Pixel corruption is no longer noticed when playing the game on systems containing an ATI Radeon X1600 series. Further details on this resolved issue can be found in topic number 737-21652
* Attempting to install the integrated WDM driver under Windows XP no longer results in an error message being displayed indicating that the hardware is not installed because the install Wizard cannot find the necessary software. Further details on this resolved issue can be found in topic number 737-20784
* Catalyst™ Control Center: The preview for the Deinterlacing aspect found in the Catalyst™ Control Center is now available when using the ATI Radeon® X1300. Further details on this resolved issue can be found in topic number 737-20986
* The Video Preview found in the Standard Settings aspect within the Video option of the Catalyst® Control Center, no longer fails to provide a preview after hotplugging an LCD panel to an ATI Radeon® 9500 or 9800, when selecting to extend the desktop. Further details on this resolved issue can be found in topic number 737-21173
* Connecting two display devices to the ATI Radeon X850 CrossFire Edition and one display device to the ATI Radeon X850 XT no longer results in the display device connected to the Radeon X850 XT still being active once CrossFire is enabled. Further details on this resolved issue can be found in topic number 737-21177
* The WDM Drivers is now enumerated and the Capture chip is now being detected when using the ATI Radeon® X850 XT (ViVo) as a slave card on a system containing an ATI Radeon® X850 CrossFire™ Edition. Further details on this resolved issue can be found in topic number 737-21178
* The secondary display device no longer fails to activate when attempting to enable clone mode when using an ATI Radeon® X800 GTO. Further details on this resolved issue can be found in topic number 737-21179
* Using the Custom option when installing the software driver no longer results in the Theater™ 550 software driver not being present. Further details on this resolved issue can be found in topic number 737-21183
* The apply button no longer remains inactive when attempting to change the Hue and Saturation settings found in the TV Properties\Avivo Color settings when enabling a TV as the primary display device and a CRT as the secondary display device. Further details on this resolved issue can be found in topic number 737-21264
* The image for extended desktop and clone mode are no longer reversed when an external monitor is connected. Further details on this resolved issue can be found in topic number 737-21653
* This release of Catalyst provides improved audio quality for European customers. Further details on this resolved issue can be found in topic number 737-21654
* The radio seek option found in the Windows XP Media Center Edition operating system is now functioning properly. Further details on this resolved issue can be found in topic number 737-21655
* The radio seek function found in the Windows XP Media Center Edition operating system is now functioning properly when using an ATI Radeon X800. Further details on this resolved issue can be found in topic number 737-21665
* Connecting an HDTV to an ATI Radeon X1300 and attempting to apply any of the custom modes found in the Digital display panel properties of the HDTV, no longer results in the display failing to apply the underscan modes. Further details on this resolved issue can be found in topic number 737-21656
* Attempting to hot-plug a DFP display device using the HDMI-DVI connector no longer results in the DFP display device failing to display an image. Further details on this resolved issue can be found in topic number 737-21657
* The ADD button for the Custom mode option found in the Catalyst Control Center is no longer greyed out when attempting to add the custom mode of 1920x1080i@30Hz. Further details on this resolved issue can be found in topic number 737-21658
* Viewing TV for several hours under Windows XP Media Center Edition on a system containing either an ATI Radeon X1300 or an ATI Radeon X1800 no longer results in an extraordinary long delay in the shut down and no longer results in Windows XP MCE TV failing to restart. Further details on this resolved issue can be found in topic number 737-21659
bueno y gordo es lo que voy a postear:
dscaler 0.0.8 aquí
por fin el mejor decoder de mpeg2 (en mi opinión) se lanza a fondo a la reproducción de mpeg2 HD (.ts) 1080i
Lo estoy probando desde zoomplayer y es con diferencia lo más fluido y hermoso que he visto NUNCA. En serio, los archivos .ts más puñeteros que tengo que con las mejores combinaciones hasta ahora conocidas seguían sin satisfacerme del todo, ahora son gloria. Es el mejor desentrelazado que he visto y supera al Purevideo de NVIDIA de lejos...
La única putada, y aquí es donde al amigo cirerita animo es que cuando avanzas el vídeo el cabroncete se queda congelado y no hay manera de avanzar y en principio el dscaler audio no consigo que funcione como filtro de audio con archivos .ts con ac3.
A probar!!!!!!!!
Saludos.
EDITO
el campéon que diseña Dscaler recomienda instalar TSREADER y usarlo como filtro en vez de hdtv ts pump. Lo he instalado, lo he selecionado como filtro y magia ya se puede avanzar el clip hacia alante y atrás. Lo curioso es que cuando le doy a filter properties al ZP me sigue saliendo el hdtv ts pump, pero noy hay duda que el tsreader algo ha instalado que me ha hecho que pueda navegar por el clip .ts sin problemas.
Tsreader se puede descargar aquí
Amigo cirerita, creo que se ha dado un gran paso para la reproducción de HD 1080i en PC's domésticos... Ya me contarás.
gracias, conan, lo probaré en cuanto pueda, estos días me falta tiempo.
ya había probado la versión 0.0.7 y no había notado mejorías. a mí me interesa sobre todo por el tema del desentrelazado, pero también lo probaré para los archivos 1080i .ts
Gracias Sergio!Cita:
bueno y gordo es lo que voy a postear:
EDITO: Los he probado con "Charlie y la fabrica de chocolate".
Simplemente "BRUTAL". :babas
Gracias de nuevo. :)
Me podeis decir como configurais el Dscaler :amor , a primera vista se ve de pelotas.
Edito para decir que se ve muy bien en imagenes estaticas pero en imagenes rapidas me falla el desentrelazado, se me ve como a franjas desincronizadas.
He instalado tambien el filtro TSreader pero no como se hace funcionar, me da el zoomplayer un error de Graph.
Vamos que soy un poco torpe, una ayudita.
Saludos.
System Mechanic 6 pro
# IMPROVED! Spyware Protection
Advanced protection from spyware, malware, adware, and other PC parasites.
# NEW! Disaster Recovery
Rescue PCs that won't start and revive damaged hard drives.
# NEW! Startup Optimizer
Accelerate boot speeds by optimizing the programs that start with Windows.
# FASTER! Disk Defrag
Defragment drives up to ten times faster than the Windows built-in defragmenter.
# NEW! Fix Hard Drive Problems
Drive Medic™ fixes disk problems before they can cause data loss or system failure.
# NEW! C[omprehensive System Inspector Tool
Get ultra-detailed diagnostic reports of all hardware and software in your PC.
# ENHANCED! Registry Optimization
Find and fix even more problems that can arise from the Registry and cripple your system.
# NEW! Advanced Process Manager
Look under the hood and see what's running. Optionally block dangerous items from starting again.
# IMPROVED! Startup Manager
Review the more than 30 places where programs can hide themselves to start automatically. Eliminate dangerous programs and block them from starting
Skyview 1.5109.0.3653 & SkyAVC.ax (NET) 2.0.0.3228
http://www.dvbskystar.com/download/click.php?id=364
nVIDIA PureVideo Decoder 1.02-196
http://www.free-codecs.com/nVIDIA_Pu...r_download.htm
Features of nVIDIA PureVideo Decoder 1.02-196:
- Enables DVD viewing with Microsoft Windows Media® Player or Microsoft Windows Media Center Edition
- High quality MPEG-2 decoder supports any third party software application based upon Microsoft DirectShow
- Enables PureVideo technology on GeForce 6 Series GPUs
- Dolby Digital surround sound decoding
- Minimizes CPU utilization by offloading the MPEG-2 decoding onto the graphics processor
- Enables advanced de-interlacing
- Decodes high-definition MPEG-2 streams for ATSC tuners
- Supports Windows Mobile-based Portable Media Centers allowing end users to transcode MPEG-2 content into Windows Media Video 9
- S/PDIF pass through for external decoding of Dolby Digital and DTS (compatible hardware required)
Changes in nVIDIA PureVideo Decoder 1.02-196 :
- Support for High Definition (HD) inverse telecine on compatible GPUs. See http://www.nvidia.com/page/purevideo.html for a list of supported GPUs.
After installing the PureVideo Decoder and using the MCE "speaker setup" wizard to select 5.1 speakers, the audio will only be set in 2 channel stereo mode. This is a known issue with Microsoft Media Center Edition 2005 Update Rollup2. You may download this patch to fix the problem. The patch sets the proper value for 5.1 analog and must be run after using the speaker setup wizard. Note: You must run this patch every time after you run the wizard in order for the settings to remain active.
- Other compatibility fixes, click here to view the User's Guide
Disculpad si este no es lugar apropiado para postear este mensaje, pero no he encontrado otro sitio más adecuado para mi pregunta, que es la siguiente:
Tengo dos archivos de subtítulos (cada uno para un idioma) en formato .srt, y busco la manera de juntarlos en un archivo único .sub, para después, desde el Zoom Player, tenerlos todos y poder seleccionar el que me apetezca.
¿Existe algún programa para hacer eso, o de forma manual (editando, copiando, pegando con el bloc de notas)?
Gracias
pues nunca lo he hecho, pero por ahí circulan muchos ficheros de subtítulos con 2 o más idiomas. supongo que Subtitle Workshop permite hacer eso sin problemas.
He estado probando con ese programa, y l único que tiene es una herramienta llamada Join. Pero lo único que hace es concatenarlos.
Al reproducir con el ZP me salen ambos a la vez, sin posibilidad de escoger uno u otro.
Tal vez, si pudiese conseguir algún fichero de esos que mencionas para comprender su codificación, me serviría para mi propósito.
Gracias
en las redes P2P hay muchos; es posible que en Extratitles también haya. muchas veces tienen extensión .sub por un lado y .idx por otro.
de hecho, ahora que lo pienso, en la guía "subtítulos" hay al menos 1-2 capturas en las que se aprecia lo que comento.
Por si alguno tiene:
- Procesador con Hyperthreading o Dual Core
- Windows XP con SP2
- Codecs de Nvidia o TT
- Gráfica 6600 o superior de NVidia
- probelmas de "stutter" con TS 1080i o 720p
y ha leido:
support.microsoft.com/kb/896256/es
Dispongo del fix en español, si alguien lo quiere que me envie un privado. A mi me ha funcionado, con la 6600GT a 60Hz va de pelotas, con la 7800GTX va mejor a 72Hz dejándole hacer el inverse telecine (evitamos el 3:2 pulldown)
Drivers 84.20, Purevideo 196 y TT ultima versión.
Salu2
FRONTEND: GameEX
Llevo unas semanas haciendo pruebas con un frontend para el Mame (estoy preparando mi máquina recreativa -pinchar junto al marcianito de mi firma- para cuando compre el pc nuevo y deje dentro el actual) y veo que también tiene opciones para reproducir archivos de video, DVD, emisoras de radio..., en fin tiene de todo un poco.
Viene preparado para ser usado con Windows Media Center, pero lo podéis instalar en cualquier pc con XP. Es totalmente configurable y fácil de utilizar.
Por si os pudiera interesar, esta es su web:
http://www.tomspeirs.com/gameex/
Saludetes!
¿Cómo junto 2 DVDs en una carpeta?
Me explico. Estoy pasando mis DVDs al disco duro, donde no tengo limitaciones de espacio. Así, quiero unir las películas que están divididas en 2 discos.
¿Cómo lo hago?
Lo primero que hago con todos los DVDs es quitarles cualquier cosa que no sea la película, es decir, menús, extras, etc.
Muchas gracias ...
JOSE LUIS
eso deberías preguntarlo en el foro de informática.
DirectX 10 SDK
http://blogs.msdn.com/sebby1234/arch...11/573054.aspx
NVIDIA
Versión: 84.21
Fecha de publicación: 17.3.2006
http://es.nvidia.com/object/winxp_2k_84.21_es.html
Cita:
Aspectos destacados de la versión:
* Certificación WHQL*
* Incorpora soporte para las GPU GeForce 7900 GTX, GeForce 7900 GT, y GeForce 7600 GT.
* Nuevas funciones y mejoras de NVIDIA PureVideo. Visitar el sitio web de PureVideo para obtener más información sobre esta tecnología y los requisitos del sistema.
o Descodificación de H.264 acelerada por hardware en las GPU de las series GeForce 6 y 7.
o Soporte de telecinado inverso en formato de alta definición MPEG-2.
o Soporte de desentrelazado espaciotemporal para MPEG-2.
* Soporte de tarjetas de diferentes marcas en configuraciones SLI de NVIDIA.
* Salida a TV y salida HD para SLI de NVIDIA.
* Soporte de VSync en juegos Direct3D en modo SLI de NVIDIA.
* Soporte de Microsoft® DirectX® 9.0c y OpenGL® 2.0
* Para conocer la lista completa de problemas conocidos y resueltos, lea la Notas sobre la versión.
Catalyst® Release Note Version 6.4
http://www2.ati.com/relnotes/catalys...ase_notes.html
X32
http://downloads.guru3d.com/download.php?det=1374
X64
http://downloads.guru3d.com/download.php?det=1375
Cita:
Catalyst® 6.4 introduces a Windows MCE Video Conversion utility. This utility allows users to convert video content that is recorded by MCE, or video content that is available to MCE, to variety of different formats. The video content can be converted to MPEG-2, MPEG-4 SP, MPEG-4 AVC and Windows Media. Ipod Video and PSP video are listed as separate formats for easy recognition.
A lo mejor me estoy columpiando pero me ha dado la impresión de que la nueva versión de TT no se ha comentado:
V. 2.3
Novedades/Fixes:
ersion 2.3 is now available for download from the Support area. As with the previous release this is a full installer and will update an existing installation of 2.x to 2.3. The updated manual for 2.3 will be released next week, but I wanted everyone to have the opportunity to use the new version over the holiday weekend.
Changes new in 2.3:
- Automatic Aspect Ratio detection for DVD's for constant height users.
On the General tab choose 'Smart' from the Auto Aspect Ratio detection dropdown. When you start playback on a new DVD, TT will briefly blank the screen when the main title is reached and calculate the AR. For this to work successfully, you need to define some new AR's corresponding to the calculated AR. For example, if you define an AR called "2.35:1", TT will select this AR if it detects the movie AR to be 2.35:1. Detected AR's are 1.66:1, 1.78:1, 1.85:1, 2.20:1, 2.35:1, 2.40:1 and 2.55:1. Define as many of these as appropriate for your environment.
- Latest nVidia decoders, version 203, containing fixes, image quality and performance improvements.
- Additional MCE remote features. The 'i' key on the remote will now bring up the Status bar for the current media. The Guide button will now bring up the File Browser. Note: By default TT nows disabled the MCE ehtray background process. This prevents the Green button or certain other keys from launching the MCE UI. If you do not want this to happen, change the registry key under TheaterTek for 'KillEHTray' to 0. There is also a 'VerifyExit' registry setting to avoid the prompt when pressing the browse back key on the MCE remote.
- On the Video tab you can now choose to use the nVidia Demux instead of the Microsoft Demux for transport stream playback. The nVidia demux can do a better job on many ts files.
- The buffer for transport stream playback has been increased so playback from DVD-R may well work better.
- The mouse can now be permanently hidden by right clicking on the display. This acts like a toggle, so right-click again to bring it back. Note, this is remembered across launches of TT.
- Resume/Auto resume is now supported for media files. i.e the U key will resume playback of a media file the next time you play it.
- This version is 'stubbed' for VFD support, so LCDSmartie should be able to support TT 2.3 shortly.
- UI enhancements. The time bar now acts as a shuttle for DVD playback to make it consistent with media files. The accuracy or granularity of the time bar has also been improved. There are many other subtle UI improvements across the app.
- New hotkeys for AR and blanking adjustment. These make it very easy to make quick changes to the AR or blanking without using the AR editor. These are listed on the Hotkeys tab of the Config dialog.
- The trial has been increased to 14 days.
- Files that contain streams can have the stream selected either by the right-click context menu under streams, or on the Status UI bar by using down arrow when the file name is selected.
- GraphEdit file support. This is probably the largest and most advanced feature in 2.3 and is intended for advanced users. You can now using the Microsoft tool called GraphEdit create a graph for the playback of any filetype assuming the appropriate codecs are installed. This file should then be saved using the namg convention 'file_extension.grf'. For example, if you create a graph for Matroska files, you'd name it mkv.grf. These files should be placed in the Data folder inside the TT folder. Whenever TT opens a .mkv file, it will use the pre-defined graph instead of trying to build this automatically. Graphs containg VMR9 will use the TT 'Fullscreen' implementation if this enabled.
This version also contains many performance improvements and general bug fixes.
no, no te columpias :D
Pues con lo de poder utilizar los filter graphs estoy alucinando, los TS de 1080i de origen "cine" con el DScaler "trucado" para IVTC metido en el TT en VMR9 Renderless fulscreen es una verdadera gozada. Es como un ZP pero en "chulo".
Se puede crear un graph por cada extensión, LA LECHE.
eso es castellano o que :lol :lol ..no me he enterado de nada..salo el Dscaler..lo tengo instaldo ...palabra filtros ...pero el IVTC ¿¿?? :mmmhCita:
Iniciado por JavierSA
en VMR9 Renderless fulscreen :chalao y TT :freak :freak (que coño es el TT??)
El ZP ..eso si lo se..Zapatero :juas
Saludos :hola
IVTC= Inverse Telecine, reconstrucción inversa de la velocidad original, reconstruye a 24 cuadros por segundo, y después le aplica el 3:2 "pulldown" para pasarlo a 60Hz (30 cuadros por segundo) con más precisión, si puedes poner la salida a 24 ó 48Hz no aplica el 3:2 pulldown, en el primer caso iría 1:1, igual que la película de cine original, en el segundo repetiría la imagen 2 veces pero con el mismo resultado, para 72Hz, lo mismo pero 3 veces, la fliuidez lograda es exactamente la misma que el original de cine.Cita:
Iniciado por Whisper
TT=Theatrertek reproductor de DVDs, haz una búsqueda o mira en www.Theatrertek.com.
ZP= Zoom Player, reproductor de casi todo.
De Dscaler hay dos versiones, la "original" y la alternativa, optimizada para 1080i.
VMR9, etc... busca en este foro, es demasiado largo de explicar.
Salu2
..muchas gracias porque de esto ni idea antes y ahora si, creo...en el caso PAL seria "casi" los 48 pues los proyes soportan 50 Hz..como pasas de 48 a 50 Hzs..pues algunos poryes son estrictos con eso... noCita:
Iniciado por JavierSA
Este le tengo..lo que no sabia es la abreviatura....que se usa en HTPCCita:
Iniciado por JavierSA
Esto haera una broma..pues esta abreviatura...la conocia..Cita:
Iniciado por JavierSA
Donde puedo conseguir la otra.. o saber cual tengo..pues tengo una .pero no se si es la normal u optimizada.. y donde puedo bajarla..Cita:
Iniciado por JavierSA
Cita:
Iniciado por JavierSA
No hace falta..pues ya lo he leido..
Muchas gracias..
Joder
:picocerrado , lo que se puede aprender en un solo parrafo de 4 lineas...:)
Saludos :hola
No, en PAL no hay IVTC, en el PAL se acelera un 4% de los 24FPS a 25FPS (50Hz).Cita:
Iniciado por Whisper
En este link tienes los enlaces a la versión y 5 páginas donde se habla del asunto:Cita:
Iniciado por Whisper
www.avsforum.com/avs-vb/showthread.php?p=6435792&&#post6435792
Configuración recomendada del Dscaler IVTC:
* Display Forced Subtitles: On
* 3:2 Playback Smoothing: On
* Experimental 720p playback: Off
I hear there are some problems with this, so I leave this off. If I want to play 720p content I will likely just use the default TheaterTek behavior, but this will require me to rename the file extensions of transport stream files I wish to use DScaler with.
* Inverse Telecine: Always Enabled <-- really important! This enables the magic.
* Adjust FPS if any Telecined Film: Keep 29.97/30 fps.
I'm not sure what the difference is between this and the 24 fps option - I will have to look at the AVS thread again!
* Deinterlace Mode: Automatic. <-- probably need this on too!
* Video Delay: 0ms
* Use Accurate Aspect Ratios: Off (Do I need this?)
* DVB Aspect Preference: 16:9
* Hardcode with PAL for ffdshow: Off.
* IDCT to use: Accelerated
* Output Colour Space: YV12 (Note the British spelling! )
* Do Analog Blanking: On
* Force Field 1 First Flag: Off (Not sure what this is for either).
Salu2
Sin comentarios :palmas :palmas :palmas :palmas al que sabe SABA... tu y cirerita soys unos "monstruos" en el mejor de los sentidos :hail :hail :hail :hail
Saludos y mil gracias :hola
Gracias JavierSA,Cita:
A lo mejor me estoy columpiando pero me ha dado la impresión de que la nueva versión de TT no se ha comentado:
V. 2.3
:)