Instalacion de un 2 HDD en el cable IDE de la LectoGrabadora

Tengo un inconveniente con la instalación de un segundo HDD y una Lecto-Grabadora de CD/DVD. no se como insertar imagenes desde mi disco eso estaria bueno para que lo vean mejor, (creo qeu les adjunte una imagen) pero igual les explico que tengo los dos elemontos , el 2do HDD y la grabadora de DVD en el mismo IDE.

Arriba del todo esta la Lecto-Grabadora, en la conexión del medio tengo al 2do HDD. Uno de los 2 no me funciona, si hago funcionar uno el otro no me funciona y viceversa, paso a comentarles como hice la conexión.

1er Intento: Grabadora como Master y HDD (segundo) como Master, me reconoce la Grabadora y anda bien pero no veo el disco.

2do intento: Grabadora como Master y HDD como Slave (esclavo) veo el Disco pero no veo la grabadora….

3er intento: HDD como Master y Grabadora como Slave , anda bien pero la grabadora no funciona del todo bien, cuando gravo comienza a andar bien pero a la mitad de camino me tira un error…. Que también se los adjunto, aca no sé si tengo problema de hardware o de caché…. He leido por ahí que cuando uno pone la grabadora como slave no funciona del todo bien…

Quisiera saber cual es la configuración correcta para la instalación de estos 2 componentes.

Aclaro que el HDD principal siempre anda bien al igual que la disquetera, componentes que no toco para nada… tampoco entro al Setup de la maquina porque a estas alturas son todos plug and play eso tengo entendido, que deberia reconocerlo solo………

El tercer intento es el que mas cerca estubo de andar ya que veía los 2 componentes pero la grabadora al estar como esclava no funcionaba bien, tuve que tirar como 4 cds haciendo pruebas y me tiraba el error a la mitad de la grabación, como les adelante les coloco a continuación dicho error…. Gracias de antemano.

1K22-0867-0795-66M4-5000-7474-****

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 8.3.2.1
Internal Version: 8, 3, 2, 1
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182F>Version: SB02 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default
CD-ROM: <TSSTcorp CD/DVDW SH-S182F>Version: SB02 - HA 1 TA 0 - 8.3.2.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BD-08MRA1 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6E040L0 atapi Port 3 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182F atapi Port 3 ID 1 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182F E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 959MB (982508kB)
Free physical memory: 493MB (505848kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

20.5.2008
CD-ROM (ISO)
15:22:22 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

15:22:22 #2 Text 0 File Isodoc.cpp, Line 6713
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:22:22 #3 Text 0 File Burncd.cpp, Line 3238
TSSTcorp CD/DVDW SH-S182F
Super Link activado

15:22:22 #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)

15:22:22 #5 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 146826 (0x00023D8A)

15:22:22 #6 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 0. Length: 202989 -> 202987.

15:22:22 #7 Text 0 File Burncd.cpp, Line 3568
Turn on Track-At-Once, using CD-R/RW media

15:22:22 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 2. Length: 202989 -> 202987.

15:22:25 #9 Text 0 File FilesystemSettingsValidator.cpp, Line 142
FS Settings: using validator 'CUDFSettingsValidatorCD'
ParamMode = 'automatic', changing UDF partition type from 'physical' to 'physical'
Changing UDF revision from '1.02' to '1.02'

15:22:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 2. Length: 202989 -> 202987.

15:22:25 #11 Text 0 File DlgWaitCD.cpp, Line 311
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 349814 ( 77:46.14)

15:22:25 #12 Text 0 File DlgWaitCD.cpp, Line 323
Write in overburning mode: NO (enabled: CD)

15:22:25 #13 Text 0 File DlgWaitCD.cpp, Line 2932
Recorder: TSSTcorp CD/DVDW SH-S182F;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

15:22:25 #14 Text 0 File DlgWaitCD.cpp, Line 497
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:22:25 #15 Text 0 File ThreadedTransferInterface.cpp, Line 754
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 202989 (202989) = #202989/45:6.39
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 202987 blocks [E: TSSTcorp CD/DVDW SH-S182F]
--------------------------------------------------------------

15:22:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 956
Prepare [E: TSSTcorp CD/DVDW SH-S182F] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 2 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 416028672, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
146676 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
146676 | 2 | 0 | 0x41 | 0 | 0 | 0x00
146826 | 2 | 1 | 0x41 | 202989 | 146826 | 0x00
349815 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

15:22:25 #17 Text 0 File ThreadedTransferInterface.cpp, Line 1027
Removed 2 run-out blocks from end of track 2. Length: 202989 -> 202987.

15:22:26 #18 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

15:22:26 #19 Text 0 File Burncd.cpp, Line 4359
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

15:22:26 #20 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

15:22:26 #21 Text 0 File Burncd.cpp, Line 4481
Cache writing successful.

15:22:26 #22 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

15:22:26 #23 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 40x (6,000 KB/s)

15:22:26 #24 Text 0 File ThreadedTransferInterface.cpp, Line 2673
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #146826

15:22:26 #25 Text 0 File MMC.cpp, Line 22530
Set BUFE: Super Link -> ON

15:22:26 #26 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

15:23:11 #27 SPTI -1135 File SCSIPassThrough.cpp, Line 196
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 02 78 2A 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x0cb57580: Len x10000
0x9E 68 26 FD F2 AA D2 5C 4C D1 A9 F0 6D 2E 4B 87
0xC0 3E BA 3C CC AB 95 7B 98 09 DE A3 AA 5B FA 69
0xAA 0F 82 3A 11 E0 20 CF 2D BA CF 5B A5 70 54 15

15:23:11 #28 CDR -1135 File Writer.cpp, Line 306
Write error
E: TSSTcorp CD/DVDW SH-S182F

15:23:11 #29 CDR -201 File WriterStatus.cpp, Line 325
Invalid write state
E: TSSTcorp CD/DVDW SH-S182F

15:23:11 #30 TRANSFER -18 File WriterStatus.cpp, Line 325
Could not perform EndTrack

15:23:11 #31 Text 0 File MMC.cpp, Line 17306
<TSSTcorpCD/DVDW SH-S182F> start Close Track #3

15:23:38 #32 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 40x (6,000 KB/s)

15:23:38 #33 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:23:41 #34 Text 0 File Cdrdrv.cpp, Line 11420
DriveLocker: UnLockVolume completed

15:23:41 #35 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)