Pues ojo con los seagate de 1 GB porque están fallando bastante. Yo me fío bastante más de los WD:

http://forums.seagate.com/stx/board/...thread.id=3668

The 1TB drive failue is a very widespread problem. There are many threads from many forums (not just the Seagate forum) regarding this particular issue. I'm going to make a little summary below.

1) The problem is BIOS no detect after a few months of usage (typically 3 months)

2) This problem applies to, ST31000340as, SD15, Thailand, Seagate 1TB drive

3) There are also problems for Segate 1.5TB, 640GB and 500GB. The 1.5TB drive's problem seems to be fixed by the newer firmware. The problems are a bit different from the 1TB SD15 problem (those drives didn't die completely).

4) Until today, Segate denied there is problem with SD15 1TB drive. SD15 is still the newest firmware.

5) If you RMA today, you are likely to get the bad drive again which is likely to fail another 3 months later. That's why I haven't RMA it yet.

6) Calling them you will get no help because they haven't acknowledge this problem offically yet.

7) Email them and you won't get any response.

8) This problem is very widespread (go to any place that sells this drive and with a online forum, you will see what I meant. e.g. newegg, ncix, amazon)

9) The previous firmware SD14 has some performance issues. But I haven't heard of any dramatic failure for that version (Some Dead on arrival, but those are "normal". By fixing the performance issue, SD15 introduced some serious bug. I suspect it's 100% failure after about 3 months of usage, but there's no way to verify this claim.

10) "Papadenadia" is probably just "Hamartolos" in disguise, who I suspected is the alter ego of this forum's moderator AlanM. But again, I've no way to verify this accusation. It's possible I'm accusing the innocent (unless this post got deleted or modified without my consent).

11) In most of the cases (applying only to no detect issue), the data are recoverable, but you have to pay for the recovery service. I haven't heard of any free solution yet.

12) Switching the PCB doesn't work.

13) No software solution I have heard of.

14) In most cases, the drive is still intact. No abnormal "clicking" sound (if it does, it's a different issue).

15) At the time of my purchase (August), there was no negative posting regarding this issue. There were a few "Dead on Arrival", but like I said, those happened to all drives.

16) The earliest complaints regarding this issue I've seen is around late October. It's more frequent in December (someone who has more time than me may want to do a more scientific count). So this problem is just starting to surface.

Cita Iniciado por sepulmaiden Ver mensaje
Vamos a ver, lo de USB 1.0 y 2.0 no tiene nada que ver con la corriente que llevan sino con la velocidad de transmisión, pero en cuanto a la cantidad de energía es exactamente la misma, es decir, 100 miliamperios. Si utilizamos un conector doble tenemos 200 miliamperios, y esto será así hasta que se estandarice la utilización del USB 3.0 que llevará 900 miliamperios.

De todas formas la mayoría de las cajas de discos duros de 2.5" además de la toma USB (si es que lleva una sola toma simple) suelen llevar un conector para ponerle opcionalmente un trasformador adicional.

Si un disco externo de 2.5" lleva un solo conector de USB puede ser por 2 motivos: porque el disco que lleva dentro no necesite más de 100 miliamperios, o la más probable que sea abaratar costes. De todas formas puede que un disco que lleva un solo USB funcione en un PC y en otro no, y esto es porque lo de los 100 miliamperios es la teoría, pero hay placas que superan este valor y otras que no llegan, y también depende de la cantidad de dispositivos que tengas conectados por USB, puede ser que desconectes todo lo que tienes por USB y el disco que antes no funcionaba ahora sí lo hace.

En cuanto a lo que he estado comentando de los discos WD, no digo que TODOS salgan malos. Lo vuelvo a decir, son rápidos silenciosos y..... parece que perfectos, pero me reitero en lo dicho, la posibilidad de que fallen en pocos años es bastante alta y esto lo digo porque como ya he dicho otras veces tengo una tienda de informática hace muchos años y jamás compraré WD. Incluso cuando me piden un TViX lo compro sin disco duro (porque NTDigitales monta WD) y les pongo yo uno. A lo mejor son manías personales pero cuando he tenido tantos problemas con clientes con esta marca.... pues como que la cojes un poco de manía .

Bueno, al menos espero haber aclarado algunas dudas en cuanto a lo de los discos de 2.5"

De todas formas en estos enlaces tenéis más información para el que quiera ampliarla:
http://es.wikipedia.org/wiki/Disco_duro_port%C3%A1til
http://es.wikipedia.org/wiki/Disposi..._memoria_flash

Un saludo.