según se lee en algunas webs del sector, y otras como engadget, las consolas del lote 734 de la edición Halo tienen la esperada revisión. En EOL no lo tienen tan claro si es una revisión total o solo parcial a 65nm pero si esta claro por las fotos de consumo que la consola haciendo lo mismo pasa de consumir 1A a 0,6A.
Engadget
" Hemos estado esperando por largo y tendido, pero finalmente, tras meses de especulación, una revisión del hardware, dos ediciones limitadas y hasta una nueva consola, Microsoft ha comenzado a enviar las Xbox 360 con CPUs de 65 nm. Según se han percatado los avispados foreros de Xbox.com, las consolas de la edición Halo pertenecientes al lote #734 parecen ser las primeras máquinas con los nuevos chips, que han sido confirmados destornillador y linterna en mano. ¿Significa esto el fin definitivo a las tres luces rojas? Esperemos que así sea."
En EOL tenemos la noticia en portada AQUI
-------
De los foros oficiales XBox
How to see if you have a 65nm (Falcon) console:
First, get a flashlight that is very bright. Then put your console upside down (HD side down). You should be looking at an black or grey piece of plastic which is the bottom vent. Shine the flashlight directly into the bottom of the console (it works best to sit the flashlight on the plastic).
Then move the flashlight to the right side of the plastic. When you look inside of the console directly below the light, you will see a large white piece of plastic. This is the airflow shroud. You can see this highlighted in this picture: http://i181.photobucket.com/albums/x...S8000516-2.jpg
Next, move the flashlight to the left a bit and look into the console again. You are looking for the large silver square that is directly in front of the airflow shroud. This piece will tell you whether or not you have a 65nm console.
90nm CPU Heatsink: http://i181.photobucket.com/albums/x...000516-2-1.jpg
65nm CPU Heatsink: http://i181.photobucket.com/albums/x127/MRCUR/heatsink4-2.jpg
(Notice that there is no heatpipe on the new 65nm CPU heatsink.)