¿Que os parece esta Placa MSI para Pentium?

Msi placa base


Esta es la foto:
http://www.msi.com.tw/images/product...4N-Diamond.jpg

Las caracteristicas:

CPU

• Supports Socket 775 for Intel® P4, P4EE, Pentium D, Pentium XE and Celeron D processors.
• Supports Intel® 05B and 05A processors.
• Supports FSB 1066/800 MHz
• Supports Intel® Hyper-Threading Technology.

The Installation of LGA 775 CPU with MSI CPU Clip & CPU Cooler


Chipset

• NVIDIA® nForce4 SLI Intel Edition Chipset
- HyperTransport link to nVidia MCP04 south bridge
- Supports 2 PCI Express x 16 and 1 PCI Express x 1 interface
- Supports dual channel, DDR2 533/667

• NVIDIA® MCP04 (for nForce4 SLI Intel Edition) Chipset
- Integrate SATA-II controller, four drives
- Dual Fast-ATA 133 IDE controller, for four devices
- IEEE 802.3 nVIDIA MAC for 1000BASE-T


Main Memory

• Supports dual channel DDR2 533/667, using four 240-pin/1.8V DDR2 DIMMs.
• Supports a maximum memory size up to 16GB


Slots
• Two PCI Express x16 slot (supports PCI Express Bus specification v1.0a compliant)
Normal mode
Primary PCI-E slot is compatible with PCI Express x 16
Secondary PCI-E slot is compatible with PCI Express x 1
SLI mode
Primary PCI-E slot is compatible with PCI Express x 8
Secondary PCI-E slot is compatible with PCI Express x 8
• One PCI Express x1 slots (support PCI Express Bus specification v1.0a compliant)
• Two 32-bit v2.3 Master PCI bus slots (support 3.3v/5v PCI bus interface)


On-Board IDE

• An IDE controller on the NVIDIA® MCP04(for nForce4 SLI Intel Edition) chipset provides IDE
HDD/CD-ROM with PIO, Bus Master and Ultra DMA133/100/66 operation modes.
- Can connect up to 4 IDE devices
- Supports RAID 0, 1, 0+1, RAID 5 or JBOD mode.


On-Board SATA

• MCP04(for nForce4 SLI Intel Edition) supports 4 SATA II ports (SATA 1 to 4).
- Transfer rate is up to 300 MB/s.
- Supports RAID 0, 1, 0+1, RAID 5 or JBOD mode.

NV RAID
• Supports up to 4 SATA and 4 ATA133 Hard drives
- RAID 0, 1, 0+1, 5 or JBOD is supported
- Supports up to 8 drives for RAID function.

Silicon Image's SATAIIRAID™
• Supports another 2 SATA II ports (SATA 5 & 6).
- Transfer rate is up to 300 MB/s.
- Supports RAID 0 & 1 mode.
- Support External SATA devices by SATA Extend bracket


Audio

• Creative sound Blaster Live 24-bit H/W audio controller CA0106
- 24-bit / 48~96KHz audio quality
- 100db SNR clarity
- Up to 7.1 channel surround sound, Dolby Digital ready
- Supports S/PDIF digital interface
- PCI 2.3 Specification compliant


LAN

• Supports dual LAN jacks
- 1st Supports 10/100/1000 Fast Ethernet by Marvell 88E1111 phy
- 2nd PCI Express LAN supports 10/100/1000 Fast Ethernet by Marvell 88E8053

WLAN & Bluetooth


• 802.11g WLAN + Bluetooth dual net PCI Card

SPECIAL NOTE: The card & antenna are only available in some specific area.



USB

• 10 USB ports
- Controlled by MCP04(for nForce4 SLI Intel Edition) chip
- 4 ports in the rear I/O, 6 ports via the external bracket


IEEE1394

• VIA® 6306 chipset
- Supports up to three 1394 ports. (Rear panel x1, front x2)
- Transfer rate is up to 400Mbps


Internal I/O Connectors

- ATX 24-Pin power connector
- 4-pin ATX 12V power connector
- 4-pin GPU power connector
- CPU / System / Power / NB FAN connectors
- 1 x IrDA infrared module header
- 1 x MSI D-Bracket 2 Connector
- CD-in connector
- Front panel audio connector
- Front panel connector
- 2 x IEEE1394 connector support additional 2 ports
- 3 x USB 2.0 connector support additional 6 ports
- 1 x Floppy disk drive connector
- 6 x serial ATA connectors
- 2 x ATA133 HD connectors


Back Panel I/O Ports

- 1 x Parallel port
- 1 x Serial port (COM 1)
- 1 x PS/2 Keyboard
- 1 x PS/2 Mouse
- 1 x Coaxial SPDIF out
- 1 x 6 in 1 Audio jack (S/SPDIF out)
- 1 x IEEE1394 port
- 4 x USB 2.0 ports
- 2 x RJ45 LAN Jacks


BIOS

• The mainboard BIOS provides "Plug & Play" BIOS which detects the peripheral devices and
expansion cards of the board automatically.
• The mainboard provides a Desktop Management Interface(DMI) function which records your
mainboard specifications.


Dimension

• 30.5cm(L) x 24.4cm(W) ATX Form Factor

Mounting

• 9 mounting holes.


El precio ronda los 250€ :(((