Arcam FMJ AVR500

AMPLIFICADOR MULTICANAL ARCAM AVR500

Analogue Audio

Audiophile quality components for best sound quality
Multi-channel 7.1 analogue input for DVD-A or SACD sources
Stereo direct mode bypasses and disables all digital processing for 2 channel analogue sources
8 stereo analogue inputs (including front 3.5mm AUX input)
Zone 2 stereo audio, from analogue inputs (Source and volume control independent from main zone)
Support for iPod via Arcam rLead / rDock (independent of RS232 connection)

Digital Audio

State of the art Analog Devices ADSP-21366 & ADSP-21367 DSPs for surround decoding
Crystal Semiconductor DACs, stereo ADC and precision electronic volume controls
Dolby TrueHD, Dolby Digital+, Dolby Digital EX, Dolby Pro Logic IIx, DTS HD Master Audio*
DTS High Resolution Audio, DTS-ES Discrete, DTS-ES Matrix, DTS96/24, DTS Neo:6**
Dolby Volume gain management and Tonal correction processing*
Dolby Volume processing for balancing of program material gain and tonal balance
Adjustable crossover switching 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz
8 digital inputs 4 rear optical, 3 co-axial, 1 front 3.5mm optical AUX input
Global audio delay, adjustable from 0-1000 milliseconds, to compensate for video processing delays in digital displays and sources with auto lip-sync for compatible displays

Video

5 HDMI inputs (up to 1080p, Deep Colour)
2 HDMI outputs (up to 1080p, Deep Colour)
3 Component inputs, one monitor output (up to 1080i)
2 S-video inputs, one monitor output
2 Composite video inputs, one monitor output
Full video up/down conversion & frame rate conversion of all inputs where technically allowed
Video enhancements (per input): Edge enhancement, Mosquito noise reduction, Random noise reduction, Block noise reduction

Custom Install Features

Independent Zone 2 (audio & video), with fixed/variable volume
RC-5 remote input jacks for both zones
IP control over Ethernet (with optional Ethernet module)
IR pass through for source components
Full suite of discrete IR RC-5 codes, including separate on / off etc
12Volt triggers, on / off for zones 1 and 2
Full duplex RS232 control input for more complex control systems
Audio streaming and Internet radio via Ethernet port (with optional Ethernet module)

General

Supplied with back-lit CR102 learning remote
Control with support for up to 7 other components and a huge on-board code library
Large, high contrast dimmable VFD front panel display
User switchable between 120 & 230 volt
Mains supplies
Size – 435mm (17.1in) wide, 440mm (17.3in)
Deep, 185mm (7.3in) high
Weight 22kg (48.5lbs) nett, 27kg (59.5lbs) packed