Tema: EMOTIVA XMC-1 previo

http://emotiva.com/products/pres-and-pros/xmc-1

Audio Capabilities

• Exclusive Dirac Live™ 7.2 automatic room correction system with PC/MAC GUI for complete system control and adjustment, "on-the-fly,” including the creation of your own customized response curve for precise alignment with your individual preferences.
• Twin Texas Instruments DA710 32-bit floating-point, dual-core, 300 MHz DSP engines capable of 1800 MIPS each, handle all audio decoding and post processing.
• Hardware based asynchronous sample rate converters between DSP1 and DSP2 for extremely high jitter immunity.
• True 7.2 audio channel paths with stereo bass management and post processing for the ultimate cinema and stereo listening experience.
• Fully independent crossover settings for fronts, center, surrounds, backs, & subs.
• Independent crossover frequencies and slope rates by channel groupings.
• Stereo subwoofer support with independent level, distance and parametric EQ.
• Selectable dynamic range control.
• Selectable Fletcher-Munson loudness compensation.
• Selectable independent or global 11 band parametric EQ.
• Support for multichannel DSD.
• Global bass and treble controls with user selectable turnover points.
• High performance AM/FM tuner with RDS text information, including artist, category, and title. Also features a signal strength meter.

Video Capabilities

• 3GHz HDMI V1.4b - 8 inputs, 2 outputs. 4k Ultra HD, 3D, ARC, CEC support.
• ARC and CEC on main output.
• Color OSD overlays and setup menus with no interruption or degradation of the native video, variable transparency, including 4K and 3D sources.
• Dual Analog Devices ADV7625 video mux’s for "Bit-Perfect" HDMI switching.

DACs and Volume Controls

• Burr-Brown PCM4202 ADC for precision 24-bit analog to digital conversion.
• Burr-Brown 24/192 DSD1796 main zone DACs.
• Dual CS3318 lossless resistor ladder volume controls for main zone. 0.5dB resolution.
• NJW 1298 lossless resistor ladder volume controls for secondary zones and mix out. 0.5dB resolution.

Record Out (analog & S/PDIF)

• Two-channel down-mix of analog or digital source playing in main zone.
• True tape monitor loop.

Mix Out

• Two-channel down-mix of analog or digital source playing in main zone - volume tracks main zone.

Second Audio Zone

• Independent audio selection from:
  • Balanced Analog In.
  • Unbalanced Analog In 1-4.
  • 7.1 analog in down-mix.
  • AM/FM tuner (shared with main zone).
  • USB Audio (2-channel only).
  • Zone 1 sync, including multichannel sources.
• Analog selections can be used with main zone off.
• Independent volume control 0.5dB resolution

Computer I/O

• 1 Ethernet port for control (RJ-45) for:
  • Firmware updates.
  • Compatible with Control4, RTI, URC, Crestron, etc.
  • Setup and control via PC/ Mac.
  • Dirac Live® GUI interface control via PC/Mac.
  • Firmware update via USB-A.

Main System Micro processor

• Texas Instruments AM-1808 Sitara Arm9 32 bit 375MHz processor

Display

• Custom designed full graphical 256x64 OLED blue display 5.5" display width.
• Fully dimmable.

XMC-1 Enhancements

The XMC-1 is fully modular - which means that, as home theater continues to evolve, and new technologies and features become available, we will be continuing to offer enhancements that add new functionality to your XMC-1.
At this time, we are pleased to announce the first two enhancements which we will be offering for the XMC-1:


XMC-1 Technology Enhancement 1: HDMI 2.0 and HDCP 2.2

Replacement HDMI board upgrades the XMC-1 from HDMI 1.4a to HDMI 2.0 with HDCP 2.2.

• Hardware - replaces original XMC-1 HDMI board
• Will be included standard on all units shipped after the board is available
• Available at no cost to anyone who purchases their XMC-1 from Emotiva at full price ($2,499) before the board is available (and anyone who has already purchased their XMC-1 at $2,499)
• Provides one HDMI 2.0 input and one HDMI 2.0 output - with full HDCP 2.2 support
• Available for $299 to anyone who purchased their XMC-1 at a discount or on the used market
• Installed by Emotiva (at no cost - recommended) or by user
• In production - available middle summer 2016

XMC-1 Technology Enhancement 2: Dolby Atmos and DTS-X

Replacement processor/decoder board adds support for Dolby Atmos and DTS-X

• Adds support for Dolby Atmos (up to 7.2.4) and DTS-x
• Repurposes Mix Outputs and Zone 2 Analog Outputs (Zone 2 will be available via digital outputs)
• Available as an option on the XMC-1 Gen3 - which will be available early 2017 (XMC-1 Gen3 will be $2,499 without Atmos & DTS-X and $2,999 WITH Atmos & DTS-X)
• Available as an upgrade to any XMC-1 without Atmos & DTS-X (for $499)
• Does NOT require HDMI 2.0 / HDCP 2.2
• Available Q1 - 2017

Faltaba un hilo específico para la bestia y he aprovechado el recién anunciado notición de Emotiva para darle su sitio particular en el foro.

Para principio del próximo año sale la 3ª generación de este pedazo de previo, ya con plena compatibilidad con los nuevos formatos y conexiones.
El que quiera actualizar su versión actual tiene que pasar por caja, lo cual está muy muy bien porque no te obligan a venderlo para no quedarte atrás.

Ya ha salido la gen 3 de la etapa asique ese será el complemento.

Sí pero valen un dineral en comparación al modelo anterior.
Aunque también las han mejorado mucho, además de ser modulares.
Se nota que partiendo de una base cojonuda se van refinando todavía más.

Qué pena no vivir en EEUU !

santi a qui lo refloto este possss

Yo me refería al rmc1 nuevo modelo de 16 canales.
Un saludo.

Se presentó el proyecto en el CES de las Vegas de este año, pero este RMC-1 creo que aún tardará en verse en el mercado con precios rondando los 5000 dólares en USA (y que aquí pasará alegremente de los 6000 euros...). Un presupuesto al que se tendrá que añadir el de las etapas de potencia correspondientes...

Un saludo del Oso

Pero a dia de hoy parece ser un aparato que buscaremos, 7 canales por bajo 4 en el techo y 2 de presencia mas 3 subwofers ..... una bola completa para una sala.....en este caso es lo que busco, bueno preferiría todo lo que he comentado mas 2 de altura....ful equip en una sala, sensación total, presencia total delantera mas atmos y poder elegir auro mas atmos o presencia sin desconectar cables ni conectar.
Un saludo y corregidme si la he liado pero es lo que me gustaría.